Line Extremes: Part 1

To my surprise the most common questions that roll in to the site are those about line. Whether it be about specific techniques or more generalized questions, anglers really want to understand the line they are using. No longer do anglers settle for pros telling them to throw line “x” or line “y”. Now they want to know when, how, and most important, WHY.
In the past I’ve told you that I use braid in nearly every application. I’ve also explained my reasoning behind that so for today we will skip past it. Whether you use braid, mono, or flouro, I believe this topic will apply equally. I call it fishing the “Line Extremes” for big bass. Personally, these extremes apply to my leader material but for you it may apply to your main line.
Let’s define what I mean by extremes. On a given day you will not find a lot of “in between” line sizes on my boat. Sure, there are techniques that require 8, 10, 12, and 15 lb line but those typically aren’t big bass applications. For the sake of today’s discussion I will be ignoring applications that require these line sizes.
In part 2 I will discuss fishing with extremely light line and why it can be deadly effective but today we’re going to discuss the other end of the spectrum.
Extremely heavy line has its place, even in clear water. Many anglers are shocked to find that I use 65-80 lb braid and 25-30 lb mono and flourocarbon leaders for every day techniques. I can often be found flipping a jig on 25 lb, swimbaiting on 30 lb, or throwing a topwater on 80 lb. Why do I do this when I am knowingly eliminating bites? Simple… I don’t believe I am eliminating bites at all. If I fished with 30 lb monofilament every day of the year I would absolutely be hurting myself but by studying the conditions you will realize that sometimes the bass don’t care about line size. On those days, fishing with extremely heavy line actually helps you catch bigger fish.
The obvious question at this point is, “how can heavy line help?” I’m going to use a video as an example.

Prior to this video I noticed that despite crystal clear conditions the bass did not seem to respond to changes in line size at all. Instead of continuing to use light line I stepped up to a very heavy flourocarbon. When I hooked this bass I immediately knew I was in trouble. The fish had managed to get the hook in her lower jaw, right where I would normally lip her. As the fight nears the boat it becomes clear that I can’t grab her. She was shaking and thrashing and was sure to come off at any minute if I didn’t make a quick decision. If I had been using light line I wouldn’t have been able to do anything about the situation but since I had stepped up my line size, I literally grabbed the line and dragged her into the boat with no fear of breakage.
In this case, I can thank my heavy line for getting this bass in the boat. Will this logic work in every application? There are times when sticking to heavy line will result in less (or no) fish. However, if you learn to watch the bass’ response it becomes very obvious when you can step up line size to maximize your chance of landing a trophy bass.
…More to come in part 2.

Beware: Off-Limits area in the Delta

While on a recent trip to the California Delta I found myself in the middle of an unfortunate circumstance. It appears that I unknowingly fished in an area that is closed to boat traffic. When situations of this nature happen there are two options. The first and most attractive is to hide the mistake and hope other anglers don’t hear about it.
The second option is to step out and make an example of your mistake in the hopes that other anglers can learn from it and not fall into the same situation. With this post I am choosing the later.
Let me begin by stating very clearly that the small stretch of 7 Mile Slough that parallels the East shore of Brannan Island State Park near 3 Mile Slough is closed to boat traffic.
I’m sorry to admit this came as a surprise to me when an officer met me at the Brannan Island launch ramp to discuss where I had been fishing. The officer was understandably upset and I drove home with a hefty ticket in my possession.

I was quite surprised by the situation as I had never realized this area was closed. There are marked buoys at the mouth of the slough but they appear to clearly define a seperation between the swim beach and a boat lane. No other signage is present but that does not change the fact that despite the appearance, the entire slough is closed.
It seems that if I choose to fish this area again in the future it will be from shore. I hope my error finds each of you before you make a similar mistake.
I look forward to hearing your thoughts on this matter. Were you already aware of this off-limits area or does it come as a surprise to you? I hope that through this post we are able to have improved signage placed at the confluence of 3 and 7 mile sloughs to help prevent similar occurances in the future.

What color swimbait should you choose?

Across the nation bass feed on a variety of prey species. Swimbait manufactures were quick to pick up on this and produce baits to match nearly any forage available to bass. On a typical store shelf you can find swimbaits that match everything from a rat, to a trout, to a goby. Without direction your only real option is to buy them all and see what works for you.
The good news is I already did the hard work for you! Over the last 10 years I’ve purchased nearly every swimbait to hit the market (with few exceptions) and have tried them in a dizzying array of colors. I’ve compiled all of that information into this quick video. I don’t cover every bait but I have a few quick tips that will help you select the right color for your situation.
You don’t need box after box of swimbaits, stick to the basics and you’ll do just fine. In fact, you’ll usually do better than the guy who spends all day digging through his boxes looking for the “magic” bait.

What swimbait colors do you have confidence in? Have your best days been on the realistic colors of some of the more extreme options? Leave a comment and share your thoughts.

Who makes the best braid?

The previous post makes my stance on braid pretty clear. If you haven’t made the switch to braided line yet, its time. Now that we have that out of the way there are a few more details to consider. The term “braided line” actually includes a variety of different materials from a handful of companies. To properly understand braid you must begin by understanding that not all braid is created equal.
I’m not here today to advocate a single brand. However, I will tell you that before reading the following material I fished with power pro and P-Line Spectrex interchangeably. At this time, I’m not sure what I will be using in the future. I’ve always liked the thought of using a brand of braid that had more carriers, as they are typically smoother and more manageable. The downside to this, at least in my own thinking, is that they tend to be weaker overall than lines with only a few carriers. I’ve been arguing with myself about what brands to try and what options might meet my needs for over a year now.
On a recent trip I stumbled my way into the pages of Florida Sport Fishing Magazine. As I thumbed through the pages of the September/October issue I was happily surprised by an in-depth article on braided lines titled, “The 30 lb. Challenge, All braids are NOT created Equal”
I was in for a treat! There are four primary factors that you need to consider when looking at a braided line. As explained in the article they are the fibrous material the braid is made of. (Typically Dyneema or Spectra fiber) The number of carriers (individual threads that will be weaved together to form the line), The “picks” per inch (this represents the number of times the carriers cross each other in the weaving process), and the final coating process.

Once you bring these four factors into play you can select a line that will meet your needs. In the meantime, I’m happy to share this graphic from the magazine. I hope you find it as helpful, eye-opening, and possibly even as much of a shocker as I did. As the title of the article stated, braids are NOT all created equal!

I have to admit that I was completely shocked by some of the results of these tests. Again, I am not here to promote any specific brand. However, after seeing these results I will personally be looking into a few different brands that may better suit my needs. I hope you’ve found this information useful!

If you’re interested in gaining a better grasp of how braided line is made and what separates one brand from another I highly recommend you visit the magazine’s website and contact them directly to try and pick up a copy of the September/October issue at: http://floridasportfishing.com/magazine/

Also, I beg you to support your local tackle shops. We’re in the midst of a tough market and they need all the help they can get. However, if you don’t have a local shop I recommend purchasing your braid from tacklewarehouse. Here is a direct link to their Braided line selection: http://www.tacklewarehouse.com/Braided_Fishing_Line/catpage-FLBRAIDED.html?from=tbassin

Did you enjoy this post? Was this information new? Leave a comment and let me hear your thoughts.